Browse our other
Multi Station Tablet Presses

Item Details
Item specification details
Property Value
Item Id 394271
Item #: 394271
Item: FETTE P3000 Tablet Press
Model #: N/A
Serial #: 23247
Year Built: N/A
Location: Arizona
Price: $10,000.00
Description

Electrical:
Power was applied to machine; would not run; could manually engage contacts and run main motor and feeders; troubleshot and traced wires from controls to panel; found processor board not seated due to panel being shipped door down and components hanging; reseated the board and could start and run machine; Press has a frequency drive and wires are reconfigured; Jog/Run sequence figured out; white set up button is jog/run; blue unmarked button is jog; drive must be latched to jog machine; you can engage the clutch button/start the drive from the jog and machine will run; e-stop button missing and wires jumped; frequency drive door latch broken; cabinet has loose and not connected wires; door switch magnets are unbolted from the doors and taped to switch bypassing the safety; all the safety components need to be repair or replaced before machine is put into operation; main drive started and ran; clutch engage button starts drive, this machine does not have a clutch, and turret started; turret speed tested; feeders motors started with turret and speed tested; machine will build and held main pressure and precompression pressure; tested while going over machine, no long term tested with pressure was performed; electrical cabinets need new filters, filters are missing and cabinet and components are covered in powder;

Mechanically:
Press was cleaned; turret was cleaned and rust removed; die table has grooves on outer edge; die table was stoned with 120,360 and 400 stones to remove burrs from die sockets and a die installed to test if burrs were removed; no measurements were performed on punch bores and die sockets; all upper and lower punch seals need to be replaced; lower punch retainer and clips need replacing; cams are worn and have damage; weight cam adjustments were hard to turn; weight cam boxes were disassembled, greased and reassembled; pressure roll surfaces have no major damage; feed frames have wear; feed frames were full of powder; feed frames were disassembled and cleaned; scrape off and take off blades need replacing; All feed frame wear items need replacing; clear feed frame window missing; damaged door handles and lock buttons were replaced or repaired; chutes are missing the reject paddles and actuators; hoppers are rough; front short panel has damage need new e-stop; two lower panel/doors need latch stud all need new spring clip
Click here to view YouTube video
Additional Prep Fees May Apply
Shipping
Item shipping dimensions and specifications
Dimension Measurement
Height: N/A
Width: N/A
Length: N/A
Weight: N/A
Prep Fee: N/A
Registered customers can request free US domestic shipping quotes. Quotes take 1-3 business days to process.
Analytics chart icon This item has  today
Sell item icon Have one to sell?
Sell
Need Financing? First Citizens Bank Finance link logo

Testimonials

  • "The biggest demand for manufacturers today is to become operational as quickly as possible and Bid on Equipment provides this solution." - Dave M.
  • "The strength of their site is how often our machinery comes up on web searches." - John G.
  • "We appreciate BoE... Always helpful, friendly and very professional." - Ali L.
  • "If you have questions about machinery you're buying they will find someone who can help. Everyone I talk to here is very friendly." - Tim Y.
  • "BoE is a powerful site that has yielded great results for our company. If you need to buy or sell equipment, I recommend this site." - Michael M.
  • "BoE keeps the engine turning and its potential is limitless. They take out the nonsense that you find on auction sites." - George P.
  • "I have sold 2 large Electric Motors through Bid On Equipment. They got them sold within a month!" - Richard B.
  • "The best thing to happen to our company, the personnel are fantastic..." - Ron W.